• Home
  • 제품정보
  • Brand별 제품정보
  • Broaman


  • 제조사Broaman



Mux22-IVT/FRAMESYNC8 is a device, which combines different formats of video, data in a single duplex fiber cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.

Mux22-IVT/FRAMESYNC8 was created to distribute sync signals to multiple cameras. Its main features are:

  • Each Sync output can be individually selected to be Video Sync or Audio Word Clock Sync.
  • Phase shift and format of Video Sync is common to all 8 outputs with guaranteed no-mismatch in timing.
  • Short circuit of one Sync output does not affect any other port.
  • VSync and VSync8 are independent and can be indyvidually configured
  • VSync and VSync8 can have independent independent phase offsets.


The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fiber cable.


Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.




  • 8 x 3G-SDI reclocked video channels
  • Video available in different I/O combinations
  • 8 x FRAMESYNC8 Outputs with common phase shift
  • Each sync output can be selected as BB/Tri-L or WC
  • 2 x fiber SFP ports for redundant Optocore ring
  • 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
  • 4 x RS485/422 or 4 x GPIO
  • 2 x LAN
  • V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
  • V-Sync independently configured from FrameSync8 module
  • Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
  • Dual redundant PSU
  • No fan
  • 1RU chassis


Video ports   
StandardsSD, ED, HD, Dual Link, 3G, ASI, MADI  
Complies with SMPTE259M, 292M, 344M, 372M, 424M  
InterfaceSDI – Serial Digital Interface  
Optical ConnectionComplies with 21 CFR 1040.10 and 1040.11 
Data rateDependent on the Video data rate – no bandwidth restriction
Fiber  cable lengthsStandard singlemode transceiver ≤ 10 km
 Special singlemode transceiver ≤ 80 km (on request)
SANE, LAN portsConvention  
AudioTIA – 568A/B, Optocore 200 Mbit/s
LANTIA – 568A/B, IEEE – 802.3 10/100 Mbit/s
Serial Data PortConvention EIA / TIA-485  
Data channelsDigital control data 4
Data rate  Up to 10 Mbps
ImpedanceTermination 330 Ω
 Source ≤ 10 Ω
Auxiliary Fiber Port1310nm fiber tunnel  
ConnectionDuplex LC  
Data rateDependent on the distance between locations – no bandwidth restriction
SyncHardware standard 8x BNC – 75 Ω 
Input StandardsWord Clock, Black Burst (bi-level), Tri-Level
 PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output StandardsWord Clock, Black Burst (bi-level), Tri-Level
 BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Phase ShiftLine, Frame, Pixel, Percent, Degree  
FrameSync8Hardware standard BNC – 75 Ω 
Output StandardsWord Clock, Black Burst (bi-level), Tri-Level
 BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Phase ShiftLine, Frame, Pixel, Percent, Degree  
Remote Control   
RS232EIA / TIA – 23257 600 Baud 
USBUSB 2.0 – Device12 Mbit/s 
LANIEEE – 802.310/100 Mbit/s 
Power Supply   
TypeSwitch-mode, universal input  
Mains voltage100… 240 V50    60 Hz 
Frequency50    60 Hz  
CoolingPassive, via surface and ventilation openings on both sides of the device
Dimensions1 RU / 19”  
W x H x D19.0 x 1.73 x 7.87 inch  
WeightDependent on configuration