Repeat48 offers electrical to optical, optical to electrical or optical to optical conversion. It features up to 12 dual modules, which can be specified as electrical to optical, optical to electrical, SFP to SFP converter from the selection specified in Oreding Options. Each channel can be connected to another location with single fiber.
NEW Repeat48-2Fiber module equipped with two SFP cages can be used to convert from multimode to singlemode fiber or to/from any CWDM or DWDM transceiver.
All BroaMan products comply with SMPTE standards, therefore can be used with 3rd party equipment.
Repeat48 can be used in a point to point pair with up to 24 fibers in between. It also connects with a Route66 device to offer additional I/O. Repeat48 might be a central standalone converter with smaller REPEAT8-NANO converters on the remote ends.
|Standards||SD, ED, HD, Dual Link, 3G, 12G, ASI, MADI|
|Complies with SMPTE||259M, 292M, 344M, 372M, 424M,|
|Interface||SDI – Serial Digital Interface|
|Optical Connection||Complies with 21 CFR 1040.10 and 1040.11|
|Data rate||Dependent on the Video data rate – no bandwidth restriction|
|Fiber cable lengths||Standard singlemode transceiver||≤ 10 km|
|Special singlemode transceiver||≤ 80 km (on request)|
|Type||Switch-mode, universal input|
|Mains voltage||100… 240 V||50 60 Hz|
|Frequency||50 60 Hz|
|Cooling||Passive, via surface and ventilation openings on both sides of the device|
|Dimensions||1 RU / 19”|
|W x H x D||19.0 x 1.73 x 7.87 inch|
|Weight||Dependent on configuration|